| Name | David Denio |
|---|---|
| Email address | david@aec-wyoming.com |
| How would you like use to size your system? | Size by heating demand load and design temperature |
| Estimated Heating Demand | 10.55 kW ( 36000 BTU/hr ) |
| Output of selected heat pump at design temperature (-30C/-22F maximum) | 8kW |
| Percentage of demand load requirement produced by heat pump at design temperature (-30C/-22F maximum) | 77% |
| External backup boiler required | 12kW |
| Internal backup boiler required if using Alt Source tank | 12kW |
| Where is your project located? | United States |
| Heating Demand Load | 36000 |
| Heating Demand Load Unit | BTU/hr |
| Selected temperature scale | Fahrenheit |
| Heating Design Temperature | -20° F |
| Arctic heat pump required | 060ZA/BE |
*NOTE* This heat pump sizing tool does not consider cooling loads. There is a possibility that your cooling load is higher than your heating load, and as such the heat pump model suggested by this tool might not be appropriate for your project. This issue is most likely to effect customers based around the great lakes and in the southeast quarter of the U.S.A where summer humidity is high. If your project is located in these areas, a calculated cooling load needs to be considered. A manual J report can calculate the cooling load of your project accurately.
Arctic takes no responsibility for any cooling performance issues resulting from using this estimation to size a heat pump instead of a manual J.
If you would like Arctic to conduct a manual J for your project, please click the link below:
